-At an iSeries command line type FFXCONFIG and hit enter.
-Take option 12 to put the processor offline and, when prompted, select ‘controlled’ so that any faxes currently transmitting will complete.
-Once the processor is offline take option 2 on the processor.
-Take ‘option 2′ again on the *Card, *ELAN. Here you will reflect the new IP address information. Hit enter. Hit enter again.
-Take option 11 on to put the processor online. The processor will go into a Reset mode and will actually reboot itself. When it comes back it will use the new ip address to connect.
If there are slave processors connecting to the master do the following:
-On the Work with FastFax Processors screen take option 12 to put them offline and select controlled when prompted.
-Once offline take option 2 on the slave processor.
-Now take option 2 on the *ENVIRONMENT *BOX 000000901. ~ here you will reflect the new ip information for the master processor. – hit enter and enter again.
-Take option 11 to put the processor online. The processor will go into a Reset mode and will come back up and connect to the master’s new ip address.